Brian Crower BC4101 Engine Bearings 4G63T

Bc4101 Brian Crower Engine Bearings For With Pc Main Acl Race

Brand: BRIAN CROWER, Manufacturer Part Number: BC4101, Fitment Type: Performance/Custom, Other Part Number: 4101, Quantity included: 4

BRIAN CROWER BC4101 Engine Bearings Description

An eta the manufacturer will be relayed to buyer and given options determine if he she can or cannot allocate extra time needed. Buyers who pay with unconfirmed addresses will not be accepted. Measuring camshafts for rise error and chatter mark detection, this model can measure 200 parts per hour. Example: a set of injectors may show up for 1994 Toyota supra naturally aspirated 2jz-GE 5 speed manual but the notes section states 2jz-GTE engine codes only.

Items on hand change often and the offer quantity available listed may not be updated in real time. By purchasing any item from our store, you agree to all terms set forth in this section. If this is the case, we will contact you within 48 hours of your purchase. If you choose to pay via Paypal with a check, bank withdrawal, or certain other methods, may not clear your payment for days even week more.

Items with a 30 day or greater handling time are on order from the manufacturer already en route to one of our warehouses. The compatibility section may list original engine or trim but notes will specify requirement modification in order for item to work as intended. In certain cases, we will contact customers who's shipping address is located a state or province where the purchased product may be illegal for public use. The options consist of superseding such items with a replacement if replacements exist otherwise buyer will be granted refund in full based on mutual agreement among both parties.

Returns if you change your mind or accidentally ordered the wrong product, we offer a 30 day return policy with 20 restocking fee as long part is unopened and in original packaging. The buyer will be given multiple options. In the rare case there is a listing error description or price, you will be contacted immediately. When you purchase a bc crankshaft, can be assured it was made with the finest steel alloy, employing only best machining, heat treating and finishing procedures, in stock at very affordable price.

If the part has a problem defect, design flaw, or damage to where it can not be installed we will facilitate manufacturer warranty either get you replacement money back. Often times, our customers are purchasing products for an already modified vehicle. We reserve the right to ship via our choice of courier. We are following their policies and guidelines on how to protect the marketplace.

Each bc crankshaft is 100% inspected to a tolerance of. Product: engine bearings acl race series rods mains set of 4 part number: BC4101 category: size: standard includes: rods, mains, thrust quantity included: Mitsubishi 4G63T engines with 2 piece main this item will not fit any applications listed above. Payment terms we require that all payments be paid through Paypal you do not need a account to pay. Shipping and handling time: unless our offer specifically states a product is in stock, then time can vary.

Street Fax holds no responsibility, either implied or otherwise for mechanical, electrical, other failure when using any aftermarket performance products. Due to the rapid pace, we may not always have physical stock. If the error prevents item from being sold because it either breaks minimum advertised price map policies set forth by manufacturer or describes an inaccurately we will refund your payment and notify you. We typically have flat rate and affordable shipping rates to over 200 countries.

International shipping time varies based on the method we use, country you are located in, and any unforeseen customs delays that have no control over. When used with the corresponding connecting rod and piston combination, bc striker kit delivers a system matched setup that installs correctly first time. All performance modifications and installations should be done at the owners own risk. More air fuel power.

This means the vehicle must have 2jz-GTE engine instead of original equipment from factory. Quality at an affordable price. On average, shipping time for our international customers is 1 to 2 weeks once it has left facility, but this an not a guarantee. BRIAN CROWER engine bearings for 4G63T with 2 pc main acl race series BC4101 images are reference only and may differ from your actual item.

We ship from warehouses ranging California to Texas, Florida Pennsylvania. Most items, but not all, that are in stock will ship within one business day of cleared payment, unless we indicate otherwise. Customers with low feedback or new accounts please note, if you are to have a rating, we may hold your item up an additional 20 business days verify purchase is legitimate. Bc high performance camshafts are ground on state-of-the-art CBC cam grinders to insure accuracy and tolerances within.

Shipping method for our non-continental us customers: we typically ship postal service USPS priority mail or 1st class. 6l v8 from the factory, but a 6. Due to how the automated system works, sometimes our offer may specify for example FedEx ground. However, in very rare cases some are not.

Warranty all products we sell are 100% covered by their normal manufacturers when you purchase from us. It is the responsibility of buyer to verify legality product IRS they intend purchase and install on their vehicle. International handling times: the system displays an overall product time to prepare for normal shipment. Please note that the estimated delivery date is s automated system not streetcars and only an estimate.

Thank you for looking at our item, and we do hope to business with. Both Paypal and inform us, as the seller, not to ship your products until has cleared payment. Every bc camshaft profile has been prototyped and Dino tested for pr oven horsepower results prior to mass production. For a free electronic copy of the manufacturers specific warranty terms please contact us via system.

If the item in picture does not look like it fits your vehicle, is likely a generic. Application fitment: please refer to the vehicle fitment or outlined within listing description itself. This is pay pals policy which we have no control over. Those that purchase with an unconfirmed address will be contacted and asked to cancel their bid a refund in full issued.

These items have a maximum lead time set but will usually arrive and ship well before the estimate. Item use and application many parts that change the performance of a vehicle are intended for off-road only. Shipping method for our international customers: we typically ship us postal service USPS priority mail, 1st class FedEx economy, or DHL. Assembly of your clutch will began after payment is completed.

BRIAN CROWER is dedicated to serving the industry with highest quality internal engine components available at very affordable prices. These alterations may be listed in the compatibility section of listing. Fitment information is broken up into its own section and specifies what the item purchasing designed or intended for. For example, a vehicle may have come with 5.

Bc billet cranks are CBC machined from round bar, premium 4340 Romola steel to ensure the strongest possible shaft available. Please read the listing description, item specifics, and shipping availability payment terms in their entirety before purchasing any. In the rare occurrence that an item is discontinued, buyer will be notified immediately as soon such information confirmed with manufacturer. When possible, we ship from the warehouse closest to your location.

Such modifications include the use of different engines, electronic components, or body chassis. If you require a specific type of shipping, or courier, please contact us before purchasing this part. The team attends events like drag races, formula d, rally cross and time attack, as well shows seam PRO to get a feel for whats next in world of automotive performance. These notes supersede all information listed to the right on them.

In the event that an item becomes unavailable due to a listing error, or discrepancy description, we reserve right cancel transaction. Quantity on hand available is subject to change at any given time. Please understand that some items are special order and may take longer than 30 business days 6 weeks for the item to come in even though it is on. Keep in mind that each manufacturer and or distributor have their own shipping terms policies both the buyer seller to abide by.

BRIAN CROWER BC4101 Engine Bearings Specifications


  • brand: Brian Crower
  • mpn: Bc4101
  • other part number: 4101
  • sku: 3380938358906381


  • fitment type: Performance/custom
  • quantity included: 4
  • types: Engine Bearings

523 Ratings (98.9%)

  1. A seller fast shipping excellent quality ! (12-28-18)
  2. Fast delivery. Great service (12-29-18)
  3. Fast shipping, excellent. Well done A (12-29-18)
  4. Great product thanks (12-28-18)
  5. perfect, just what i was looking for (12-28-18)


  • paid by: Buyer
  • policy: returns accepted
  • time: 30 Days


  • PayPal


  • cost: $0.0
  • to: Worldwide
  • type: Flat
  • handling: 5 days

Looking to buy BRIAN CROWER BC4101? Prices: $290.55-$446.25 (5 offers).

  1. Best price! Fixed Price $290.55
  2. $424.42
  3. $446.25
  4. $446.25
  5. $446.25


  • currency: USD
  • availability: In Stock
  • category: Auto Parts > Engines Components > Bearings
  • condition: New
$290.55 to $446.25 USD (5 offers)
engibea logo
New. US Seller. Factory valvesprings were not made to handle the abuse of higher lift and duration, especially not at the rpm we take our engines to when racing, or even driving enthusiastically. If you are installing upgraded cams, do yourself a favor and install valvesprings and retainers while you're in there.+$0.00 shipping
New. US Seller. The 1st Gen engine (6 bolt crank) was used from 1989-1992. The second generation engine (7 bolt crank) was introduced in 1993, but used in the 1st Gen chassis through 1994. The 7 bolt, 4G63 engine was used until 1999.+$0.00 shipping
New. US Seller. The BC 4G63 cams are manufactured to top-quality specs. Brian Crower high performance camshafts are ground on state-of-the-art CNC cam grinders to insure accuracy and tolerances to within. 02mm. Every Brian Crower camshaft profile has been prototyped and dyno tested for proven horsepower results prior to placed into mass production.+$0.00 shipping
New. US Seller+$0.00 shipping
New. US Seller+$0.00 shipping

  • bc4101
  • 4g63t